[Magic-dev] compilation on debian sid ... errors

[Blazej Kaczorowski z interia.pl]

when i make

 $> export CAD_ROOT ~/.magic


before running magic i got

couldn't read file "/home/kaczor/.magic/magic/tcl/wrapper.tcl": no such 
file or directory
but when i point to /usr/local/lib i still get the same error :-/ ... 
magic works and i got the tech file but if i run:

"/home/kaczor/Documents/uczelnia/Semestr8/AUS/magic/tech/SCN3ME_SUBM.30.tech: 
line 6563: section drc:
    OK types "space" in more than one plane.
    Assuming same plane (active) as edge."

but i gues its some error in tech file ... this is the lines from 6560-6570:

"
 "N-Diffusion,P-Diffusion overhang of Transistor < 3 (Mosis #3.4)" active

 edge4way poly,fp,rp,pc/a ~(poly,fp,rp,pc/a,nfet,pfet,fet,prp)/active 1 
space space 1 \
 "Poly spacing to Diffusion < 1 (Mosis #3.5)"

 edge4way nfet ~(nfet)/active 3 ~(pselect)/select ~(nfet)/active 3 \
 "N-Transistor space to P-Select < 3 (Mosis #4.1)" select

 edge4way pfet ~(pfet)/active 3 ~(nselect)/select ~(pfet)/active 3 \
 "P-Transistor space to N-Select < 3 (Mosis #4.1)" select
"


pliz help ... i dont know even if this file loads properly ...


Blazej Kaczorowski z interia.pl napisał(a):

> oki i made it .. i compiled Magic 3.4 ... but i have problems with 
> Techmgr ... Error: can't read "CAD_ROOT": no such variable ...
> i was tryingto make CAD_ROOT variable, but i realy dont know what it 
> shoulb be pointing at ... my directory with projects or maybe 
> /usr/local/lib/magic? or what ... pliz help ... i dont have any 
> technologies just "Technology: (none)" ... pliz help
>
> Svenn Are Bjerkem napisał(a):
>
>> On Friday 24 February 2006 11:09, interia wrote:
>>  
>>
>>> i run normaly make config and then make and i get:
>>>
>>> "
>>> --- making modules
>>> --- compiling extflat/EFargs.o
>>> EFargs.c:22:9: warning: extra tokens at end of #endif directive
>>> /usr/lib/gcc/i486-linux-gnu/4.0.3/include/varargs.h:4:2: error: #error
>>> "GCC no longer implements <varargs.h>."
>>>   
>>
>>
>> I bet you are compiling an old version of magic with a too new 
>> version of gcc.
>>
>> Maybe you can try:
>> $> CC=gcc.3.4 make
>>
>>  
>>
>
>
> ----------------------------------------------------------------------
> Kliknij po wiecej! >>> http://link.interia.pl/f18ed
>
> _______________________________________________
> magic-dev mailing list
> magic-dev at vlsi.cornell.edu
> http://vlsi.csl.cornell.edu/mailman/listinfo/magic-dev
>
>


----------------------------------------------------------------------
Kliknij po wiecej! >>> http://link.interia.pl/f18ed